HFP—2500F高频发生器故障诊断与维修

本文介绍了高频发生器在日常工作中经常出现的故障，以及诊断排除方法。     

A note on the calculation of strain histories in orthogonal streamline coordinate systems

An extension of a previous work concerning the calculation of strain histories along streamlines is made to get more complete and useful expressions of Finger's strain tensor in a cylindrical (or Cartesian) coordinate system as well as in an orthogonal streamline coordinate system. One of the results shows that Winter's tracking model is correct.Relations among the recent three results of Winter, Adachi and Crochet et al. are presented clearly. Moreover useful applications of Frenet-Serret's formula to the study of the deformation and flow kinematics along streamlines are shown in comparison with the ordinary tensor approach.     

Compact diode-pumped Nd:YVO4 intracavity-doubled red laser at 671 nm

A design of diode-pumped high efficiency Nd:YVO₄/LBO laser with a compact linear cavity was reported. Employing a type-II noncritical phase-matched LBO crystal, we generated 520 mW of 671 nm in single transverse mode at 6 W of incident pump power, the optical conversion efficiency being 8.7%.     

Frequency-tripled Nd:YAG laser ablation in laser structuring process

With the increasing demand for finer lines/spaces on PCB boards, a new technology—laser structuring—has emerged in recent years. In this research, the frequency-tripled Nd:YAG laser is selected as the laser source in laser structuring; this laser is often used in miniaturization machining. This paper describes in detail the processing parameters’ influences, such as laser power, numbers of repetition, repetition rate and bite size, on laser structuring results. From the research results, it can be concluded that the line width and depth are increased with increases in the laser power and numbers of repetition. Repetition rate, bite size and velocity are related to one another. When the bite size is fixed, the velocity increases with the repetition rate and the depth of the line is decreased at the same time. When the repetition rate is fixed, velocity increases with the bite size.     

Finite-time disturbance observer-based trajectory tracking control for quadrotor unmanned aerial vehicle with obstacle avoidance

This paper investigates the problem of trajectory tracking control for quadrotor unmanned aerial vehicle (UAV) in the presence of dynamic obstacles and external disturbance forces/torques. More specifically, two new sliding mode disturbance observers are firstly designed to estimate the external disturbances, in which the observation errors can converge to zero in finite time. Furthermore, utilizing the observation information, a new sliding mode surface-like variable-based position tracking control scheme and a novel nonsingular terminal sliding mode-based attitude synchronization control scheme are developed to drive the UAV tracking the reference trajectory with obstacle avoiding. Moreover, the tracking errors of the close-loop control system can converge to zero within finite time by the analyses of Lyapunov methodology. Finally, the numerical simulation results are presented to illustrate the effectiveness of the proposed control schemes.     

主动隔振中气动压力跟踪的预测控制研究

气动伺服系统的压力跟踪是主动隔振系统中的一个重要环节。本文根据气动伺服系统的特点，建立了系统压力工作点的模型，应用基于状态空间的预测控制方法对系统压力进行了轨迹跟踪控制。首先，提出了一种控制器切换的方法来消除压力跟踪过程中的稳态误差；其次，通过对预测控制算法的改进减小了滞后对闭环系统动态性能和稳定性的影响。实验表明，本文提出的方法有效地解决了主动隔振系统中的气动压力跟踪问题。     

Large amplitude free flexural vibrations of laminated composite skew plates

Here, the large amplitude free flexural vibration behaviors of thin laminated composite skew plates are investigated using finite element approach. The formulation includes the effects of shear deformation, in-plane and rotary inertia. The geometric non-linearity based on von Karman's assumptions is introduced. The non-linear governing equations obtained employing Lagrange's equations of motion are solved using the direct iteration technique. The variation of non-linear frequency ratios with amplitudes is brought out considering different parameters such as skew angle, number of layers, fiber orientation, boundary condition and aspect ratio. The influence of higher vibration modes on the non-linear dynamic behavior of laminated skew plates is also highlighted. The present study reveals the redistribution of vibrating mode shape at certain amplitude of vibration depending on geometric and lamination parameters of the plate. Also, the degree of hardening behavior increases with the skew angle and its rate of change depends on the level of amplitude of vibration.     

A novel technique for time-resolved detection and tracking of interfacial and matrix fracture in layered materials

A novel experimental technique is developed for time-resolved detection and tracking of damage in the forms of delamination and matrix cracking in layered materials such as composite laminates. The technique is non-contact in nature and uses dual or quadruple laser interferometers for high temporal resolution. Simultaneous measurements of differential displacement and velocity at individual locations are obtained to analyze the initiation and progression of interfacial fracture and/or matrix cracking/delamination in a polymer matrix composite laminate system reinforced by graphite fibers. The measurements at multiple locations allow the speeds at which interfacial crack front (mode-I) or matrix cracking/delamination front (mode-II dominated) propagates to be determined. Experiments carried out use three-point bend configurations. Impact loading is achieved using a modified Kolsky bar apparatus with a complete set of diagnostics for load, deformation, deformation rate, and input energy measurement. This technique is used to characterize the full process of damage initiation and growth. The experiments also focused on the quantification of the speed at which delamination or damage propagates under primarily mode-I and mode-II conditions. The results show that the speed of delamination (mode-I) or the speed of matrix cracking/delamination (primarily mode-II) increases linearly with impact velocity. Furthermore, speeds of matrix failure/delamination under primarily mode-II conditions are much higher than the speeds of mode-I crack induced delamination under mode-I conditions.     

Cyclometalated Iridium(III) Complexes as Two‐Photon Phosphorescent Probes for Specific Mitochondrial Dynamics Tracking in Living Cells

Five cyclometalated iridium(III) complexes with 2‐phenylimidazo[4,5‐f][1,10]phenanthroline derivatives ( IrL1 – IrL5 ) were synthesized and developed to image and track mitochondria in living cells under two‐photon (750 nm) excitation, with two‐photon absorption cross‐sections of 48.8–65.5 GM at 750 nm. Confocal microscopy and inductive coupled plasma‐mass spectrometry (ICP‐MS) demonstrated that these complexes selectively accumulate in mitochondria within 5 min, without needing additional reagents for membrane permeabilization, or replacement of the culture medium. In addition, photobleaching experiments and luminescence measurements confirmed the photostability of these complexes under continuous laser irradiation and physiological pH resistance. Moreover, results using 3D multicellular spheroids demonstrate the proficiency of these two‐photon luminescent complexes in deep penetration imaging. Two‐photon excitation using such novel complexes of iridium(III) for exclusive visualization of mitochondria in living cells may substantially enhance practical applications of bioimaging and tracking.